Dennis can you identify the product you used? I was considering buying a turbo cover, but they are not inexpensive. I like your alternative.

I'm still in, but maybe you could have them engraved with the Drew P Logo to enhance the value?

I reuse those nuts a few times and nothing has fallen off my cars lately. The smaller hot wire on the positive battery cable that goes to the junction box could in theory take all the current draw of the electrical system except the starter draw when cranking. So if everything was on and running may...

Dennis , did you buy or make those dimple dies? I have thought about turning some to experiment, but never have.

Sweet photo. Some places they don't see us SAAB guys competing too often with our "antiques". then we have to do our best to show them SAAB is not dead yet !!

I like that " just copy Dennis". We can usually just copy Dennis, Luke, Jordan and many others on this site and not go wrong!!
I really like that hold-down box. It would take some time to duplicate that box exactly.

Your pin connections are correct for OBD2. I just rob the OBD2 plug from NG 900 or 9-3's at the U -pull yards.

I'm still in for sure. gmreider

Speaking of wiring the T-5 , are you wiring in an OBD-2 port ? I sort of like them as a quick test for codes , or you can use the Tech 2 for some info.

Hutch , I have map sensors available for you too!
That wire harness that goes toward the back seat should be the old LH test plug from 90 on up. snip -snip. should only be 4 wires , I think. or follow it and it should lead to a small square black box , perhaps with a little removable cover.

Hutch, I just looked on the shelf and I have 2 or 3 of those throttle bodies to steal parts from. So got you covered.

If you need the oil feed tube pieces, eEuro has them listed as a kit #0998460 for $38.40 The $150+ kit has head bolts and antifreeze etc. added

when I bought my one and only 900 Quaife , I paid about $1100 and waited about 3-4 months until it was built and in my hands. The lesson there was "plan ahead". I love my unit, it made a world of difference in my event times and exit speeds out of corners etc. I have even good much quicker...

Hi Jon that was Jordan who is using a modified 9000 Quaife in eEURO'S "NORMA". I looked into it , but after going to Quaifes site and down loading the build drawings for both the 900 unit and the 9000, decided to buy the 900 unit and pay the price. Look the drawings over, they tell the sto...

Jordan , I like the front spring rate, but what are you using on the rear? I get so much front lift and rear squat on acceleration that I am considering maybe 600 lbs. on the rear. "Red" just got torn apart for a little trans work and after doing an engine leak down, maybe a quick motor ch...