I have a Jak Stoll LH2.2 chip meant for red top 34 lb/hr injectors that I will probably never use again, it has the redline raised to ~7,200 I believe. Let me know if you're interested in that. It'll take a little re-wiring on your part but shouldn't be too bad. 7200 sounds wonderful, but id imagin...

parts are scarce. at least compared to LH. if I were to change it out I would go with a carburetor.
I know people have done this with LH. im worried about passing tech with a t5 setup, direct ignition is pretty obvious.

still no luck! need more RPMS ASAP I don't like loosing to Hondas!

if anyone can burn or find me a chip... ill make it worth your while.

14" wheels on a '88-up 900?

can it be done with any combination of wheel spacers, backspacing and/or "gently clearancing" front calipers...

for a circle track car. doesn't need to be pretty.

I know the tensioner is different but im 90% sure I have used/modified the stock 5 gear tensioner to work.

do these exist anymore? still need some!

type 4 or 5 primary drives?

i was under the impression that the t5 crank sensor needed a different input? mine is wired to a turbo distributor so I can play with timing, but it doesn't matter reads the same.

I think he would be interested in that ecu. just need to know what the rev limit is.

thank you all for the info. paulh if you are able to find that file I would be VERY interested in a chip. most likely more than one. we have a '92 9000 which is LH 2.4.2 that needs the same treatment. Jordan, while i have a bit of experience with t5 in my 9-3, Im trying to keep this as low budget as...

hello, new here but I have been lurking for a while. I have been racing asphalt circle track with a '92 2.1 c900 for years, with very good results. it is a mostly stock class, no turbos. I have been trying for a long time to change or eliminate the rev limiter at 6250 rpm. it's not that I expect mor...

still looking. no rush now, just need a few sets before spring.

very cool, i race up there a lot.

not to hijack the subject, but that car looks awful familiar. did it run at monadnock speedway in winchester NH a few years ago?

looking for type 4 and/or type 5 gearsets with chains. have a few sets of type 7's if you would like to swap, or i will pay cash. please message with your location and price. thank you.

needed for use in circle track cars. ASAP.