Wewlads! Got the boards and just put one together.
I talked with one of the designers after I noticed there are 6 ground pins under the RN-52 bluetooth module that can't be soldered, he said don't worry about them. If you could get to them, it might improve range but he's never bothered and it works fine without them.
Very nice boards from OSHpark, makes me feel like my photoresist etching setup was a complete waste of time and money. Soldering it was a fun challenge, the bluetooth module is the most difficult so I cheated a bit with my flux pen. Small chisel tip is a must.
The LEDs are a little confusing as the markings for the cathode and anode are not very clear unless you look up the data sheets.
Anyhow, I'm going to program it tomorrow and tear apart my girlfriends 9-5 to plug it in and see if it works or if it goes up in a puff of magic blue smoke.
I've got two extra boards and three extra cd changer connectors, still want a board and/or connector ajagodnik?
Any 9-3/9-5 owners interested in bluetooth audio?
-
- Posts: 23
- Joined: Sat Jul 20, 2013 9:07 pm
- Nickname: Aryl
- Number of Saabs currently owned: 1
- Crazyswede
- Team Turbo Troll Crew
- Posts: 4540
- Joined: Fri Sep 22, 2006 3:53 pm
- Nickname: Mongo
- Number of Saabs currently owned: 97
- Location: Vermont
- Contact:
Re: Any 9-3/9-5 owners interested in bluetooth audio?
I like my teeth white thank you. I don't understand these new body modding trends. stretched ears, piercings galore, now blue teeth. What is the world coming to?
I am the 73%
-
- Posts: 828
- Joined: Fri Apr 20, 2007 11:49 pm
- Number of Saabs currently owned: 2
- Location: Lancaster, PA
Re: Any 9-3/9-5 owners interested in bluetooth audio?
I blame the youths!
Blue Jello Rain which PCB version did you order? I hadn't even thought about orientation of the LCDs, I'll have to check that when I'm home. Thats good to hear about the bluetooth chip, I was curious about it as well but figured since there was no good way to solder it without an oven it must be ok.
ajagodnik let me know if you get one/some from Blue Jello Rain, I have an extra version 3.3a PCB and connector if you'd like.
Blue Jello Rain which PCB version did you order? I hadn't even thought about orientation of the LCDs, I'll have to check that when I'm home. Thats good to hear about the bluetooth chip, I was curious about it as well but figured since there was no good way to solder it without an oven it must be ok.
ajagodnik let me know if you get one/some from Blue Jello Rain, I have an extra version 3.3a PCB and connector if you'd like.
-
- Posts: 23
- Joined: Sat Jul 20, 2013 9:07 pm
- Nickname: Aryl
- Number of Saabs currently owned: 1
Re: Any 9-3/9-5 owners interested in bluetooth audio?
I got 3.2.
One of the leds has the polarity marker on the back side. Looks like a green "T". The other ones are visible from the top, one side next to where you solder it on is colored.
Still have not programmed it though. Got my 900 torn apart to replace what seems to be the original (Super stretched) timing chain and a bunch of other stuff. No wonder it sounds like it's about to explode...it is.
One of the leds has the polarity marker on the back side. Looks like a green "T". The other ones are visible from the top, one side next to where you solder it on is colored.
Still have not programmed it though. Got my 900 torn apart to replace what seems to be the original (Super stretched) timing chain and a bunch of other stuff. No wonder it sounds like it's about to explode...it is.
-
- Posts: 29
- Joined: Mon Jun 22, 2015 9:52 am
- Number of Saabs currently owned: 3
- Location: Sunny OH
Re: Any 9-3/9-5 owners interested in bluetooth audio?
Hutch, sorry I haven't been on the forum in a couple weeks due to that whole 'life' thing. I haven't gotten to discuss with anyone yet, or do anymore reading about it.
Shoot me a PM for the total for board and connector with your paypal address when you get a moment!
BlueJelloRain, if you still have an extra from your order, let me know!
Thanks!
Shoot me a PM for the total for board and connector with your paypal address when you get a moment!
BlueJelloRain, if you still have an extra from your order, let me know!
Thanks!
-
- Posts: 23
- Joined: Sat Jul 20, 2013 9:07 pm
- Nickname: Aryl
- Number of Saabs currently owned: 1
Re: Any 9-3/9-5 owners interested in bluetooth audio?
Finally got the loom extension and programmed/installed it today.
I'm amazed it worked first try, soldering pins that small (Especially the bluetooth module) was sketchy, super difficult to see if there are any solder bridges.
It works perfectly. Steering wheel buttons work to pause/skip tracks, no ignition noise interference, girlfriend is very happy with it. I'll see what other functions there are in a few days, possibly program in a few custom ones.
Possible issue is the bluetooth module ALWAYS has power, even with car off, the amp draw is so small that it probably won't be an issue.
I'm amazed it worked first try, soldering pins that small (Especially the bluetooth module) was sketchy, super difficult to see if there are any solder bridges.
It works perfectly. Steering wheel buttons work to pause/skip tracks, no ignition noise interference, girlfriend is very happy with it. I'll see what other functions there are in a few days, possibly program in a few custom ones.
Possible issue is the bluetooth module ALWAYS has power, even with car off, the amp draw is so small that it probably won't be an issue.
Who is online
Users browsing this forum: No registered users and 6 guests