front hubs
-
- Posts: 51
- Joined: Wed Sep 25, 2013 1:07 pm
- Number of Saabs currently owned: 4
- Location: Vermont
front hubs
I need a set of front hubs and knuckles for my 1983 base model 900. In replacing a bearing, one of the hubs was misshapen, so I figure I ought to track down a set that's in better shape. I figured someone on here would have some lying around after doing an axle swap. I'd rather travel to pick up a set near me (I'm in central Vermont), but I'm willing to pay shipping for a rust free set. Let me know what you've got. Thanks.
-
- Posts: 326
- Joined: Fri Jul 13, 2012 8:28 am
- Number of Saabs currently owned: 6
- Location: Boyertown PA
Re: front hubs
If no one else comes forward, I have a set of 87 900 turbo hubs and uprights that used vented rotors. Only problem is I am in Penna.
- Geoff
- Team Turbo Troll Crew
- Posts: 3893
- Joined: Fri Oct 20, 2006 3:31 pm
- Nickname: Geoff
- Number of Saabs currently owned: 6
- Location: Nude Humpshire
Re: front hubs
Do you just need the hub or the whole spindle?
I might have a spare hub that I pressed out of a spindle when changing to a vented setup.
I might have a spare hub that I pressed out of a spindle when changing to a vented setup.
The kind of dirty that doesn't wash off
-
- Posts: 51
- Joined: Wed Sep 25, 2013 1:07 pm
- Number of Saabs currently owned: 4
- Location: Vermont
Re: front hubs
I think I'm going to need both hubs and spindles. If possible, I'd like to keep the solid rotor set-up.
It occurs to me that I might be better off asking whether anyone has a full front axle assembly, from the tripod bearing out to the spindle and hub, that they'd be willing to part with. I need both sides.
It occurs to me that I might be better off asking whether anyone has a full front axle assembly, from the tripod bearing out to the spindle and hub, that they'd be willing to part with. I need both sides.
-
- Posts: 51
- Joined: Wed Sep 25, 2013 1:07 pm
- Number of Saabs currently owned: 4
- Location: Vermont
Re: front hubs
Bump. I figured I ought to ask again if anyone has a set of front hubs and spindles for a 1983 base model 900. Alternatively, I'd be interested in a set of axle assemblies for same. Thanks.
-
- Posts: 61
- Joined: Sat Sep 15, 2007 3:52 pm
- Number of Saabs currently owned: 3
- Location: Wareileimei Keys
Re: front hubs
I think I do...newly rebuilt hubs certainly...but need to wait until the snow and ice melts around the shed.
-
- Posts: 51
- Joined: Wed Sep 25, 2013 1:07 pm
- Number of Saabs currently owned: 4
- Location: Vermont
Re: front hubs
That'd be great. Let me know when you've got access to them and what you'd like for them. Thanks.
Who is online
Users browsing this forum: No registered users and 17 guests