99/900 Manual Rack Bushings & A-arm spacers
Re: 99/900 Manual Rack Bushings & A-arm spacers
How about the rack parts?
- Jordan
- Site Admin
- Posts: 4068
- Joined: Fri Oct 13, 2006 2:38 pm
- Number of Saabs currently owned: 6
- Location: Vernon, CT
- Contact:
Re: 99/900 Manual Rack Bushings & A-arm spacers
20 sets are in production now.
-
- Posts: 103
- Joined: Wed Feb 13, 2008 1:07 pm
- Number of Saabs currently owned: 0
- Location: New Mexico
Re: 99/900 Manual Rack Bushings & A-arm spacers
I'd like a set of the bushings and tie rod inners for my 99, if I'm not too late?
Zac
Zac
- Jordan
- Site Admin
- Posts: 4068
- Joined: Fri Oct 13, 2006 2:38 pm
- Number of Saabs currently owned: 6
- Location: Vernon, CT
- Contact:
Re: 99/900 Manual Rack Bushings & A-arm spacers
not too late.. they are still being produced. Might be another week before I get them in my hands.
You can buy them here at anytime.
http://www.eeuroparts.com/Parts/59532/S ... z2zWVKHf3K
You can buy them here at anytime.
http://www.eeuroparts.com/Parts/59532/S ... z2zWVKHf3K
-
- Posts: 51
- Joined: Wed Sep 25, 2013 1:07 pm
- Number of Saabs currently owned: 4
- Location: Vermont
Re: 99/900 Manual Rack Bushings & A-arm spacers
I bought a couple of manual racks from spgftw a few years ago. I'm in the process of pulling a dead power steering rack out of my 86 sedan, and want to use one of the manual racks. Before I install it, I'd like to replace the tie rods, but reading this thread makes me think I need the eEurokit, as the tie rods don't seem to be available anywhere. Is that the case? Any words of advice would be welcome.
- Crazyswede
- Team Turbo Troll Crew
- Posts: 4540
- Joined: Fri Sep 22, 2006 3:53 pm
- Nickname: Mongo
- Number of Saabs currently owned: 97
- Location: Vermont
- Contact:
Re: 99/900 Manual Rack Bushings & A-arm spacers
I was looking into using a mitsubishi evo rack in a 900 (not sure it would fit a 99). Those racks are actually pretty reasonably priced and have reduced ratios. I still have not confirmed the width but I think the rack is a little narrower than the stock 900 rack which makes me think adapters could be made to make it a little wider.
I am the 73%
Who is online
Users browsing this forum: No registered users and 10 guests