Saab 99 radiator

[Crazyswede]

a quick search on ebay turns up:

http://www.ebay.com/itm/56MM-ALUMINUM-A ... 61&vxp=mtr

http://www.ebay.com/itm/APDI-Radiator-8 ... 84&vxp=mtr

http://www.ebay.com/itm/Radiator-APDI-8 ... e4&vxp=mtr

[Luke]

Hi Scott, for my 99 rally car i used a 900s or 9/3 radiator and cut the plastic tanks off, removed the bottom plate and cut three rows of core off the bottom. made my own tanks from alloy extrusions purchased from my local alloy supplier. The outlets can be made up from old slave cylinder internals and all welded up. Works a treat and not that expensive!

Would love to see pics of this!

[Scott]

I have to think there is a generic radiator out there that would be more efficient and smaller than the stock one that could be retrofit into the 99s without too much fuss. Some street rod version that would make our (ok my) lives easier.

I don't personally have the skills to hack one up and make it work, and can't afford a custom made one.

(I'm really trying to get the wise ones here to do my work for me...)

[Jordan]

The tricky part is that they have sort of a funny shape to clear the front motor mount. And the inlet and outlet are both at the top which is unusual. You'll have to modify something to get universal one to work, but it shouldn't be that difficult.

[saabfan9]

I looked at all those ebay links and checked out rockauto.....thanks for the leads but none of them will work for me... mine is a 1973 my driver side upper outlet faces the driver fender

[saabfan9]

actually both inlets/outlets are wrong for mine....1973 99

[rsp57]

It's been a while but i finally got some pics

[Chouan]

I have one that should work for you. Just had it tested, no leaks. If your still looking I can get some pictures for you.

Where are you located?