900 Springs
Posted: Thu Oct 08, 2020 8:40 pm
by Crazyswede
Edit -
Believe the rears were new overload coils, the fronts were for the Buick.
Front
https://www.moog-suspension-parts.com/moog-cc653And I think I did cut a coil off of them.
Think the rears might be overload coils.
Re: 900 Springs
Posted: Sat Oct 10, 2020 9:20 am
by squaab99t
Interesting, do you know the free length and/or spring rate? Which end would you remove a coil from?
Re: 900 Springs
Posted: Sun Oct 11, 2020 9:04 pm
by KPAero
https://www.summitracing.com/parts/EIB-12003000300SI think this is what I used in the rear. They fit the rear with out modification to anything, and I thought the ride height and rate worked well. The fronts I paired them with were also from Eibach and I think were a 13"x5" 250 lbs spring. Those required new lower spring perches be made.
Re: 900 Springs
Posted: Wed Oct 14, 2020 2:26 pm
by Crazyswede
According to the Moog site:
part number moog-cc653
Both ends Squared
Resting height 13.44in
installed height 10in
inner diameter 4.25in
wire thickness 0.64in
spring rate 357#
Load 1230#
Spring Type Variable Rate