Here is my $500 4 door project. I named it after the roadkill Rotsun project car. Like the Rotsun its rusty, though its much less bad than other cars i have owned. No holes in the trunk and only one minor floor pan hole. Its finally on the road and going to the body shop next week to have the small amount of control arm rust repaired with new panels from saabits. I added some photos of them at the end. They are pretty good gauge of steel.
This car needed a ton of work on it to make it roadworthy and i got quite a bit of help from friends here as well as the FB 900 community which has been great for questions and answers.
Things i changed:
Plugs were fouled, IAC was dirty. Got it running again pretty easily
Radiator
cooling fans
Reverse lever fix. Reverse now works perfectly.
Alternator bracket snapped in half.
Crank pulley looseness was causing the battery not to charge.
Crank pulley looseness caused the oil pump housing to get damaged. Replaced housing and oil pump gear.
Since I was already there I did the water pump.
I've been driving it around the block and to the auto body shop. The drive is so enjoyable. I haven't driven a 900 since 2014 and forgot what it was like.
I like the patina and i don't think its worth painting unless corrosion starts to develop.
IMG_20201121_160329 by
Sam Scherer, on Flickr
IMG_20201224_143024 by
Sam Scherer, on Flickr
IMG_20201213_105432 by
Sam Scherer, on Flickr
IMG_20201224_143036 by
Sam Scherer, on Flickr
IMG_20201224_143217 by
Sam Scherer, on Flickr
IMG_20201224_143044 by
Sam Scherer, on Flickr
IMG_20201224_143053 by
Sam Scherer, on Flickr
IMG_20210619_125702 (2) by
Sam Scherer, on Flickr
![Image](https://live.staticflickr.com/65535/51400572764_96c8157282_k.jpg)
IMG_20210619_130643 (1) by
Sam Scherer, on Flickr
IMG_20210619_125904 (1) by
Sam Scherer, on Flickr
Saabits Panels
IMG_20210825_120704 by
Sam Scherer, on Flickr
IMG_20210825_120852 by
Sam Scherer, on Flickr
IMG_20210825_120900 by
Sam Scherer, on Flickr
There is no such thing as too low or too stiff.