gaskets/seals 2.0 (1973)

THE place for technical discussions concering the construction and preparation of SAABs for all forms of motorsport, Rally, Road Racing, Auto-X etc....
User avatar
saabfan9
Posts: 447
Joined: Wed Nov 02, 2011 2:21 pm
Number of Saabs currently owned: 4
Location: Chicago

gaskets/seals 2.0 (1973)

Postby saabfan9 » Sat Mar 02, 2013 2:01 pm

can you guys tell me where i can source gaskets and seals for my '73 2.0 (complete engine teardown-front/rear crank seals-rings?) it's an injected ems motor if that makes any difference...i'll find a part here and there but i worry if they would fit properly anything feebay really scares me just soo much generic junk there...thanks for any help

User avatar
saabfan9
Posts: 447
Joined: Wed Nov 02, 2011 2:21 pm
Number of Saabs currently owned: 4
Location: Chicago

Re: gaskets/seals 2.0 (1973)

Postby saabfan9 » Mon Apr 08, 2013 3:45 pm

i have been able to find crank seals but not much else in the lines of gaskets....is my 2.0 a b or h engine? will anything work off of the later cars even c900's? would like to find as many seals as poss before i tear the motor down (timing cover-head-intake-trans covers)...any help where i could find stuff..thanks guys

gmreider
Posts: 326
Joined: Fri Jul 13, 2012 8:28 am
Number of Saabs currently owned: 6
Location: Boyertown PA

Re: gaskets/seals 2.0 (1973)

Postby gmreider » Mon Apr 08, 2013 5:00 pm

Your 73 2.0 litre motor is a "B " motor. Front and rear oil seals are the same up to 93 and newer. I really suspect you find gaskets from Eeuroparts .com or FCP. I would worry more about finding water pumps or parts thereof. I think that is the scarce stuff . I am not sure about timing chains and tensioners and chain guides. I am sure someone else will chime in here on this site. I personally have no " B " or "H " motors left in my fleet.

User avatar
MattWatson
Posts: 210
Joined: Mon Mar 14, 2011 11:48 am
Number of Saabs currently owned: 3
Location: Alberta, Canada

Re: gaskets/seals 2.0 (1973)

Postby MattWatson » Mon Apr 08, 2013 5:19 pm

I believe people like drew were making ones for scarce parts like the water pump out of seal paper stock.

As for the rest of it, Parts for Saabs used to special order things in and Elring used to make the headgasket (pn 520.586) so they can likely get you anything you need. I would phone and ask. Their shipping prices are cheap, so don't let the fact that they are in the UK turn you off.

I assume EEURO may be able to do the same if you ask, they checked on a couple pistons for me, but they were NLA and someone just had stock left over that they were selling.

Edit: Birdiemango also mentioned he uses Payen Bc650 in his rally cars and they work out fine and are cheap. With a quick google search, they are still available.

User avatar
MattWatson
Posts: 210
Joined: Mon Mar 14, 2011 11:48 am
Number of Saabs currently owned: 3
Location: Alberta, Canada

Re: gaskets/seals 2.0 (1973)

Postby MattWatson » Mon Apr 08, 2013 5:27 pm

Also: Looks like this place has a lot of stuff, never bought from them though... They look like they have a conversion kit, which is usually everything you need gasket wise to rebuild a part of an engine, ie head, block etc. It doesn't list WHAT it is for, so you may need to call.

FYI you are looking for B20 parts
http://www.precisionintl.com/engine.asp ... 4&EID=4041
Last edited by MattWatson on Mon Apr 08, 2013 5:31 pm, edited 1 time in total.

User avatar
Jordan
Site Admin
Posts: 4068
Joined: Fri Oct 13, 2006 2:38 pm
Number of Saabs currently owned: 6
Location: Vernon, CT
Contact:

Re: gaskets/seals 2.0 (1973)

Postby Jordan » Mon Apr 08, 2013 5:31 pm

rockauto.com for head gasket kits etc. You have a B engine. Eeuro can probably get stuff but they don't stock items for 8-valve saab motors.

Most NLA metal flange engine gaskets call for replacement using loctite 518.

User avatar
saabfan9
Posts: 447
Joined: Wed Nov 02, 2011 2:21 pm
Number of Saabs currently owned: 4
Location: Chicago

Re: gaskets/seals 2.0 (1973)

Postby saabfan9 » Mon Apr 08, 2013 6:31 pm

what do you guys think of this.. http://www.ebay.com/itm/110129344968?ss ... 1438.l2649 ..or should i keep looking around...also hear that front wheel bearings are hard to come by mine are fine but when the day comes where might i look

User avatar
DrewP
Posts: 2084
Joined: Wed Dec 26, 2007 8:27 pm
Nickname: TANK
Number of Saabs currently owned: 1
Location: Monrovia, CA

Re: gaskets/seals 2.0 (1973)

Postby DrewP » Mon Apr 08, 2013 6:44 pm

Jeez, for that price you can't really go wrong.

I got wheel bearings from a NAPA about 2 years ago, they seemed to be a fairly common part. Can't remember now if I bought a front or a rear though, one was NLA the other wasn't. Forgot which was which.
"You can educate ignorance, but you can't fix stupid."

User avatar
MattWatson
Posts: 210
Joined: Mon Mar 14, 2011 11:48 am
Number of Saabs currently owned: 3
Location: Alberta, Canada

Re: gaskets/seals 2.0 (1973)

Postby MattWatson » Mon Apr 08, 2013 6:54 pm

If you end up getting that and it seems good, let us know. I will pick one up for my 99.


Return to “SAAB MOTORSPORT TECH”

Who is online

Users browsing this forum: No registered users and 4 guests