Looking for recommendations on a brake line flaring tool that will handle all materials including stainless steel and make consistent quality flares. It looks like the Eastwood tool is pretty popular:
http://www.eastwood.com/professional-br ... oCbpjw_wcB
Brake line flare tool
-
- Posts: 181
- Joined: Fri Jul 16, 2010 9:20 am
- Number of Saabs currently owned: 1
- Location: Bay Area, CA
Re: Brake line flare tool
Apparently I can't use the search function. I saw that someone had recommended the Rigid flare tool to include SS.
I decided to give the Cal-van flare tool kit a try after finding some decent reviews. I am going to be using Copper-Nickel for my lines.
http://www.cal-vantools.com/p-162-autom ... -tool.aspx
I decided to give the Cal-van flare tool kit a try after finding some decent reviews. I am going to be using Copper-Nickel for my lines.
http://www.cal-vantools.com/p-162-autom ... -tool.aspx
- squaab99t
- Posts: 1270
- Joined: Wed Mar 28, 2007 5:43 pm
- Number of Saabs currently owned: 4
- Location: Shoreline Wa
Re: Brake line flare tool
jdwertz wrote:Apparently I can't use the search function. I saw that someone had recommended the Rigid flare tool to include SS.
I decided to give the Cal-van flare tool kit a try after finding some decent reviews. I am going to be using Copper-Nickel for my lines.
http://www.cal-vantools.com/p-162-autom ... -tool.aspx
Besure it can do the correct type of flare and the dies accommodate the correct tubing SAE vs metric. When I did my clutch slave I had to use a metric double bubble. Not sure what the brakes have but worth a double look.
-
- Posts: 181
- Joined: Fri Jul 16, 2010 9:20 am
- Number of Saabs currently owned: 1
- Location: Bay Area, CA
Re: Brake line flare tool
I double checked and the master kit I ordered does all types of flares in both standard and metric:
3/16", 1/4", 5/16", 3/8" Double and Single Flares
4.75 mm, 6mm, 8mm Double, Bubble and Single Flares
Not too shabby for $58 bucks shipped.
3/16", 1/4", 5/16", 3/8" Double and Single Flares
4.75 mm, 6mm, 8mm Double, Bubble and Single Flares
Not too shabby for $58 bucks shipped.
- Jordan
- Site Admin
- Posts: 4068
- Joined: Fri Oct 13, 2006 2:38 pm
- Number of Saabs currently owned: 6
- Location: Vernon, CT
- Contact:
Re: Brake line flare tool
I think those are the same design as these
http://www.eeuroparts.com/Parts/59206/I ... tric-9214/
which I have used, but just on softish brake lines. They worked well on the cunifer line I used.
The rigid type I have for A/N fittings, but is sort of big for most brake jobs.
http://www.eeuroparts.com/Parts/59206/I ... tric-9214/
which I have used, but just on softish brake lines. They worked well on the cunifer line I used.
The rigid type I have for A/N fittings, but is sort of big for most brake jobs.
-
- Posts: 181
- Joined: Fri Jul 16, 2010 9:20 am
- Number of Saabs currently owned: 1
- Location: Bay Area, CA
Re: Brake line flare tool
The kit I bought ended up not working so well, the die broke after my third flare
I am probably going to give the Eastwood tool a shot.
I am probably going to give the Eastwood tool a shot.
Return to “SAAB MOTORSPORT TECH”
Who is online
Users browsing this forum: No registered users and 4 guests