THE place for technical discussions concering the construction and preparation of SAABs for all forms of motorsport, Rally, Road Racing, Auto-X etc....
- Posts: 1121
- Joined: Wed Mar 28, 2007 5:43 pm
- Number of Saabs currently owned: 4
- Location: Shoreline Wa
Jordan wrote:Thread is 10mmx1.25 I believe. I am looking at getting some replacement pipes pre-made by do88,
Correct 10mm 1.25 pitch. Had to get a bolt to plug my pre intercooler temp location so I could run before the new sensor arrived. Eeuro purchase of course. FYI 9000t 91-95 has the amp junior timer connector and the 10mm thread.
Don't need a preintercooler temp for engine management, but more about the efficiency of the intercooler and measuring the delta T (temperature)
- Posts: 60
- Joined: Thu Feb 11, 2016 10:19 am
- Nickname: Kris
- Number of Saabs currently owned: 1
- Location: Netherlands
I have mine in front of the TB, had some Intercooler pipes welded up (didn't like the silicone, pipe, silicone, pipe etc. look) On other T5 900's I've seen it's usually located around there.
My ride: MY91 Saab 900 Aero T5.5 Converted, 9000 Aero interior, Xenon projectors and many more mods/upgrades
Who is online
Users browsing this forum: No registered users and 1 guest