This year the Northwest Hillclimb Assoc. is requiring all drivers to have HANS-type devices if the car is in a class that allows R-compound tires.
My helmet was new last year, a proper M rather than the SA's I've usually used. I just bought a Stand-21 HANS (+ mounting studs) and new 5-Point harness to go with it. About $500 worth of updates...
I guess a Nomex suit is next.
New Safety gear
- 99Super
- Posts: 1069
- Joined: Wed Jan 24, 2007 5:14 pm
- Number of Saabs currently owned: 13
- Location: Bend, OR
- Contact:
New Safety gear
_______________________________________________
"I don't want no Commies in my car!... No Christians either!"
"I don't want no Commies in my car!... No Christians either!"
- squaab99t
- Posts: 1270
- Joined: Wed Mar 28, 2007 5:43 pm
- Number of Saabs currently owned: 4
- Location: Shoreline Wa
Re: New Safety gear
Best investment you can make is in your health.
- Crazyswede
- Team Turbo Troll Crew
- Posts: 4540
- Joined: Fri Sep 22, 2006 3:53 pm
- Nickname: Mongo
- Number of Saabs currently owned: 97
- Location: Vermont
- Contact:
Re: New Safety gear
The Hans is pricey but should help prevent your neck from serious damage. They don't really impede your head movement too much but do take some getting used to. If/when you need a new harness I suggest getting the one designed for the Hans as it will stay in place much better.
I am the 73%
-
- Posts: 409
- Joined: Thu Feb 11, 2010 6:42 pm
- Nickname: Pascal
- Number of Saabs currently owned: 2
- Location: Ipswich, MA
Re: New Safety gear
Am I the only person that feels like the 3in belts actually work better with the HANS (brand) device than the 2" Hans belts?
- 99Super
- Posts: 1069
- Joined: Wed Jan 24, 2007 5:14 pm
- Number of Saabs currently owned: 13
- Location: Bend, OR
- Contact:
Re: New Safety gear
KPAero wrote:Am I the only person that feels like the 3in belts actually work better with the HANS (brand) device than the 2" Hans belts?
After test-fitting mine, the 3" web covers the entire 'arm' of the HANS and feels pretty solid there. One of the reasons I decided to keep the 3", even though I had ordered the taper 2"...
John
_______________________________________________
"I don't want no Commies in my car!... No Christians either!"
"I don't want no Commies in my car!... No Christians either!"
- Crazyswede
- Team Turbo Troll Crew
- Posts: 4540
- Joined: Fri Sep 22, 2006 3:53 pm
- Nickname: Mongo
- Number of Saabs currently owned: 97
- Location: Vermont
- Contact:
Re: New Safety gear
I think it might depend partially on the seat you are using, your fit in that seat, and how your body is shaped. When I have used the Hans in the past I always found the wider belts were a pain to get in place and it felt like they wanted to move out on me. However I also figured out after a while that all the seats I had been using were much too short...such that the belts were actually rising up through the seat to my shoulders and instead of pulling me back in the seat they were trying to compress me down and back....which is really tiring. I then set out to find a seat that fit and I figuratively scoured the entire world. I found one seat that is pretty close and I had to order it from England. Its a Corbeau Revenge iirc and cost about $800 + another $300 for shipping. Then we stopped rallying, everyone bought houses, and I've been too busy to try it out since then.
I am the 73%
Return to “SAAB MOTORSPORT TECH”
Who is online
Users browsing this forum: No registered users and 6 guests