Reamer for gearlinkage pin saab 99

THE place for technical discussions concering the construction and preparation of SAABs for all forms of motorsport, Rally, Road Racing, Auto-X etc....
Post Reply
speedysaab
Posts: 24
Joined: Mon Mar 16, 2009 2:11 pm
Number of Saabs currently owned: 4

Reamer for gearlinkage pin saab 99

Postby speedysaab » Mon Jan 06, 2020 10:51 am

Hi I need to ream out a sport rally gear selector rod on the 99 box to accept the tapered pin - does anyone know the reamer I need?

Presume it’s a specific taper?

Thanks
Rob
Top
User avatar
99Super
Posts: 1065
Joined: Wed Jan 24, 2007 5:14 pm
Number of Saabs currently owned: 13
Location: Bend, OR
Contact:
Contact 99Super

Re: Reamer for gearlinkage pin saab 99

Postby 99Super » Mon Jan 06, 2020 11:45 am

What's special about the S&R selector rod?
_______________________________________________
"I don't want no Commies in my car!... No Christians either!"
Top
User avatar
Jordan
Site Admin
Posts: 4068
Joined: Fri Oct 13, 2006 2:38 pm
Number of Saabs currently owned: 6
Location: Vernon, CT
Contact:
Contact Jordan

Re: Reamer for gearlinkage pin saab 99

Postby Jordan » Mon Jan 06, 2020 12:05 pm

It might be a dual fork selector? I've also just run a standard bolt and nut in them. I can measure a pin for you when I get a moment.
Top
User avatar
Jordan
Site Admin
Posts: 4068
Joined: Fri Oct 13, 2006 2:38 pm
Number of Saabs currently owned: 6
Location: Vernon, CT
Contact:
Contact Jordan

Re: Reamer for gearlinkage pin saab 99

Postby Jordan » Thu Jan 09, 2020 10:57 am

I measured a 3 degree taper. 0.243” -> 0.196” over 0.9in.
Top
Post Reply

Return to “SAAB MOTORSPORT TECH”

Who is online

Users browsing this forum: No registered users and 12 guests