Does anyone have them?
I'm trying to get speed into my T5/OBDII.
I have the sender and speedo, but I don't have the wiring diagram for the speedo.
9000 Speedometer pinouts?
- 99Super
- Posts: 1068
- Joined: Wed Jan 24, 2007 5:14 pm
- Number of Saabs currently owned: 13
- Location: Bend, OR
- Contact:
9000 Speedometer pinouts?
_______________________________________________
"I don't want no Commies in my car!... No Christians either!"
"I don't want no Commies in my car!... No Christians either!"
- Crazyswede
- Team Turbo Troll Crew
- Posts: 4540
- Joined: Fri Sep 22, 2006 3:53 pm
- Nickname: Mongo
- Number of Saabs currently owned: 97
- Location: Vermont
- Contact:
Re: 9000 Speedometer pinouts?
I am the 73%
- 99Super
- Posts: 1068
- Joined: Wed Jan 24, 2007 5:14 pm
- Number of Saabs currently owned: 13
- Location: Bend, OR
- Contact:
Re: 9000 Speedometer pinouts?
Thanks Seth. That didn't really help. The best I found so far was the discussion somewhere here (Hutch? Luke?) that said that the top two isolated pins are the inputs, then its positive to the top pin, output to T5 on the center pin and ground to the bottom pin.
I have a 9000 speedo to play with, but if that doesn't work, this is the route:
https://www.dakotadigital.com/index.cfm ... rd1192.htm
Looks like it could be handy for installing a tach in the E350 too.
I have a 9000 speedo to play with, but if that doesn't work, this is the route:
https://www.dakotadigital.com/index.cfm ... rd1192.htm
Looks like it could be handy for installing a tach in the E350 too.
_______________________________________________
"I don't want no Commies in my car!... No Christians either!"
"I don't want no Commies in my car!... No Christians either!"
- Crazyswede
- Team Turbo Troll Crew
- Posts: 4540
- Joined: Fri Sep 22, 2006 3:53 pm
- Nickname: Mongo
- Number of Saabs currently owned: 97
- Location: Vermont
- Contact:
Re: 9000 Speedometer pinouts?
I am the 73%
- 99Super
- Posts: 1068
- Joined: Wed Jan 24, 2007 5:14 pm
- Number of Saabs currently owned: 13
- Location: Bend, OR
- Contact:
Re: 9000 Speedometer pinouts?
Thanks Seth! Interesting website.
That confirms what I read here.
I'll tear into it next when I'm back in town and let you know if it works out.
I know I started on this several years ago when I first started my T5.2, but abandoned it when the 9000 speedo wouldn't fit in the 99 location.
Now, with OBDII support, I can build a full digital dash and not worry about an analog dial.
That confirms what I read here.
I'll tear into it next when I'm back in town and let you know if it works out.
I know I started on this several years ago when I first started my T5.2, but abandoned it when the 9000 speedo wouldn't fit in the 99 location.
Now, with OBDII support, I can build a full digital dash and not worry about an analog dial.
_______________________________________________
"I don't want no Commies in my car!... No Christians either!"
"I don't want no Commies in my car!... No Christians either!"
- 99Super
- Posts: 1068
- Joined: Wed Jan 24, 2007 5:14 pm
- Number of Saabs currently owned: 13
- Location: Bend, OR
- Contact:
Re: 9000 Speedometer pinouts?
Just a quick update on this, I wired it as I stated above and it's working great. Both the speedo and the OBDII signal.
_______________________________________________
"I don't want no Commies in my car!... No Christians either!"
"I don't want no Commies in my car!... No Christians either!"
Return to “SAAB MOTORSPORT TECH”
Who is online
Users browsing this forum: No registered users and 9 guests