We've got about 10 days before Sandblast. Is everybody ready?
I spent last night removing the vacuum advance system from my distributor and welding up the advance plates solid, cleaning the centrifugal springs and weights and reassembling. Full/total advance looks to be around 37-39 degrees at 14@idle/20@2000...it's off the marks on the flywheel, so that's an approximate.
the vacuum advance was pretty weak and not really desired for performance use anyway.
so..I'll just be driving the car back and forth to work as I have been..until it needs to get loaded onto the trailer.
How about you Luke?
Are we all ready for Sandblast?
We should be ready to roll. We replaced all the ball joints on one side and installed one new CV to replace the used spare one we had thrown on at Black River. Also installed the new rally computer (Brantz laser) and intercom (Peltor FMT110). We've driven the car very little in the past few months, but everything seems to be in order. I'll be bringing down the ems steering rack and vented brake setup for you.
- Crazyswede
- Team Turbo Troll Crew
- Posts: 4540
- Joined: Fri Sep 22, 2006 3:53 pm
- Nickname: Mongo
- Number of Saabs currently owned: 97
- Location: Vermont
- Contact:
- Crazyswede
- Team Turbo Troll Crew
- Posts: 4540
- Joined: Fri Sep 22, 2006 3:53 pm
- Nickname: Mongo
- Number of Saabs currently owned: 97
- Location: Vermont
- Contact:
Return to “SAAB MOTORSPORT TECH”
Who is online
Users browsing this forum: No registered users and 8 guests