who all is running T5 heads on b202's??

THE place for technical discussions concering the construction and preparation of SAABs for all forms of motorsport, Rally, Road Racing, Auto-X etc....
User avatar
99Super
Posts: 927
Joined: Wed Jan 24, 2007 5:14 pm
Number of Saabs currently owned: 8
Location: Boise, ID
Contact:

Re: who all is running T5 heads on b202's??

Postby 99Super » Sat Mar 05, 2016 7:13 am

allessence wrote:If things go well I might come down May 1 with the 77 BMW R100RS..I have a set of Krauser 4valve heads I'm rehabbing now.. Not a SAAB but still fun to drive..


I sold my 77RS last summer to a neighbor. The 95 RSL is so much less finicky : )
I do miss the RS.

John
_______________________________________________
"I'll have no Commies in my car...and no Christians either!"

User avatar
Jon1
Posts: 272
Joined: Sat Mar 01, 2008 5:09 pm
Number of Saabs currently owned: 30
Location: Fort Edward, NY
Contact:

Re: who all is running T5 heads on b202's??

Postby Jon1 » Sat Mar 05, 2016 10:10 am

I have watched MrPete. I also watch Tom's Techniques, he has an almost identical mill as mine. https://www.youtube.com/channel/UCqR9wR ... pqiN8C0dIg
Jon
jon1
with many classic 900 turbos

User avatar
Jon1
Posts: 272
Joined: Sat Mar 01, 2008 5:09 pm
Number of Saabs currently owned: 30
Location: Fort Edward, NY
Contact:

Re: who all is running T5 heads on b202's??

Postby Jon1 » Wed Mar 09, 2016 3:06 pm

After mounting the intake manifold to the head, I found that I needed to relocate the FPR to the other side of the fuel rail, re-position the AIC to get some clearance for the fuel rail inlet banjo bolt, because the fuel rail is in a different position. I also modified the passenger side motor mount bracket to work with the existing threaded bosses in the head.
Jon

jon1

with many classic 900 turbos

allessence
Posts: 469
Joined: Thu Jan 18, 2007 10:09 pm
Nickname: allessence
Number of Saabs currently owned: 6
Location: Rutland, MA

Re: who all is running T5 heads on b202's??

Postby allessence » Wed Mar 09, 2016 9:05 pm

99Super wrote:
allessence wrote:If things go well I might come down May 1 with the 77 BMW R100RS..I have a set of Krauser 4valve heads I'm rehabbing now.. Not a SAAB but still fun to drive..


I sold my 77RS last summer to a neighbor. The 95 RSL is so much less finicky : )
I do miss the RS.

John


I've had it since November. put on about 2K in 2 months.. Was a blast.. Now sadly I've been doing all the major service to get it ready for up coming season.. all seal, clutch lube, pulled the heads and ported them. De carb the heads and pistons.. Etc etc.. It is a tinkers dream.. simple but in need of TLC..
Okay, so I'm female and like SAAB's go figure. Mind you, I like a good set of strappy sandal's just about as much though they don't take you thru the corners as fast. LOL

Rosie: http://www.saabcentral.com/forums/showt ... =Jennifers


Return to “SAAB MOTORSPORT TECH”

Who is online

Users browsing this forum: No registered users and 2 guests