Page 6 of 6

Re: who all is running T5 heads on b202's??

Posted: Sat Mar 05, 2016 7:13 am
by 99Super
allessence wrote:If things go well I might come down May 1 with the 77 BMW R100RS..I have a set of Krauser 4valve heads I'm rehabbing now.. Not a SAAB but still fun to drive..


I sold my 77RS last summer to a neighbor. The 95 RSL is so much less finicky : )
I do miss the RS.

John

Re: who all is running T5 heads on b202's??

Posted: Sat Mar 05, 2016 10:10 am
by Jon1
I have watched MrPete. I also watch Tom's Techniques, he has an almost identical mill as mine. https://www.youtube.com/channel/UCqR9wR ... pqiN8C0dIg

Re: who all is running T5 heads on b202's??

Posted: Wed Mar 09, 2016 3:06 pm
by Jon1
After mounting the intake manifold to the head, I found that I needed to relocate the FPR to the other side of the fuel rail, re-position the AIC to get some clearance for the fuel rail inlet banjo bolt, because the fuel rail is in a different position. I also modified the passenger side motor mount bracket to work with the existing threaded bosses in the head.

Re: who all is running T5 heads on b202's??

Posted: Wed Mar 09, 2016 9:05 pm
by allessence
99Super wrote:
allessence wrote:If things go well I might come down May 1 with the 77 BMW R100RS..I have a set of Krauser 4valve heads I'm rehabbing now.. Not a SAAB but still fun to drive..


I sold my 77RS last summer to a neighbor. The 95 RSL is so much less finicky : )
I do miss the RS.

John


I've had it since November. put on about 2K in 2 months.. Was a blast.. Now sadly I've been doing all the major service to get it ready for up coming season.. all seal, clutch lube, pulled the heads and ported them. De carb the heads and pistons.. Etc etc.. It is a tinkers dream.. simple but in need of TLC..