86 900 Street / Track Project
- SwedeSport
- Posts: 3021
- Joined: Mon Jun 15, 2009 9:52 am
- Number of Saabs currently owned: 5
- Location: Pottstown, PA
- Contact:
Re: 86 900 Street / Track Project
Got the base frame back from the welder today and began to mock up the actual air dam front panels and the framework to secure it all.
Swedesport Motors, Apparel and Accessories for SAAB Junkies.
Http://Facebook.com/swedesportmotors
Swedesportmotors@gmail.com
Http://Facebook.com/swedesportmotors
Swedesportmotors@gmail.com
-
- Posts: 326
- Joined: Fri Jul 13, 2012 8:28 am
- Number of Saabs currently owned: 6
- Location: Boyertown PA
Re: 86 900 Street / Track Project
Looks really good Jason. Maybe you can make another one for the red notch back.
In your SPARE TIME of course !
I have a feeling we are both going to me hammering it @ Pagoda next weekend?
Are we going to pit together again?
In your SPARE TIME of course !
I have a feeling we are both going to me hammering it @ Pagoda next weekend?
Are we going to pit together again?
- SwedeSport
- Posts: 3021
- Joined: Mon Jun 15, 2009 9:52 am
- Number of Saabs currently owned: 5
- Location: Pottstown, PA
- Contact:
Re: 86 900 Street / Track Project
Yep. We should have a ton of fan support this year. Although I may be holding back a little. I changed the shocks, and finally put in the box with the Quaife. It will be like driving a different car. The only seat time with the new setup has been a gas and coffee run. I should take it easy until I feel it out.
Maybe this one could end up on the notchback eventually. I designed it to bolt on to the stock bumper mounts, and it screws into the fenders at the plastic inserts that held the rails for the bumper extensions. It will bolt easily onto any c900.
Maybe this one could end up on the notchback eventually. I designed it to bolt on to the stock bumper mounts, and it screws into the fenders at the plastic inserts that held the rails for the bumper extensions. It will bolt easily onto any c900.
Swedesport Motors, Apparel and Accessories for SAAB Junkies.
Http://Facebook.com/swedesportmotors
Swedesportmotors@gmail.com
Http://Facebook.com/swedesportmotors
Swedesportmotors@gmail.com
-
- Posts: 326
- Joined: Fri Jul 13, 2012 8:28 am
- Number of Saabs currently owned: 6
- Location: Boyertown PA
Re: 86 900 Street / Track Project
If I know you, you'll hold back a few runs and then you'll have to go for the FAST run. We should have a good time. 5 cars in the class. If we forget the Mazda SPEED we should all be in contention.
- SwedeSport
- Posts: 3021
- Joined: Mon Jun 15, 2009 9:52 am
- Number of Saabs currently owned: 5
- Location: Pottstown, PA
- Contact:
Re: 86 900 Street / Track Project
Got some more mock up done on the air dam this weekend. The framework is almost figured out.
Nut-N- Bolted the motor too. Checked nearly every fastener on the forward half of the car.
Flushed out the cooling system and refilled with water + water wetter.
Everything seems good to go for Pagoda this coming weekend.
Nut-N- Bolted the motor too. Checked nearly every fastener on the forward half of the car.
Flushed out the cooling system and refilled with water + water wetter.
Everything seems good to go for Pagoda this coming weekend.
Swedesport Motors, Apparel and Accessories for SAAB Junkies.
Http://Facebook.com/swedesportmotors
Swedesportmotors@gmail.com
Http://Facebook.com/swedesportmotors
Swedesportmotors@gmail.com
-
- Posts: 607
- Joined: Wed Mar 21, 2007 10:09 pm
- Number of Saabs currently owned: 2
- Location: Reading, PA
- Contact:
Re: 86 900 Street / Track Project
You sure thats low enough?
Paul
Paul
- RadioFlyer
- Posts: 918
- Joined: Wed Oct 05, 2011 11:08 am
- Nickname: RadioFlyer
- Number of Saabs currently owned: 7
- Location: Utah
Re: 86 900 Street / Track Project
So what's the point of an airdam like that? Wouldn't the additional wind resistance just slow you down?
- SwedeSport
- Posts: 3021
- Joined: Mon Jun 15, 2009 9:52 am
- Number of Saabs currently owned: 5
- Location: Pottstown, PA
- Contact:
Re: 86 900 Street / Track Project
The point of an air dam is to manage the air. It is meant to direct the air around the car or channel it into the intakes etc. Airflow under the car has a lot of wind resistance since the bottom is not smooth. It can also cause lift. The center section directs it into the radiator, and off to each side the air flows around the sides of the car. The splitter adds a small amount of downforce at speed too. I plan to add a pair of scoops on either side to direct some air onto the brakes.
It is probably a bit of overkill, Aerodynamics don't really work at lower speeds. But I took off the original turbo fascia, and wanted to create something to put in its place. If all else fails, at least it will look badass!
I think the bigger factor I should be worrying about is the weight. The front airdam assembly is not exactly light. Eventually I would like to take what I learn from this and develop a lightweight front assembly from fiberglass. I already have a fiberglass bumper skin that looks very similar to the stock flatnose unit, but with a shorter overhang. If I incorporate the grille, headlight bezels, turn signals, and lower air dam into it, it will reduce weight tremendously. The one shown is only 5.5 lbs
It is probably a bit of overkill, Aerodynamics don't really work at lower speeds. But I took off the original turbo fascia, and wanted to create something to put in its place. If all else fails, at least it will look badass!
I think the bigger factor I should be worrying about is the weight. The front airdam assembly is not exactly light. Eventually I would like to take what I learn from this and develop a lightweight front assembly from fiberglass. I already have a fiberglass bumper skin that looks very similar to the stock flatnose unit, but with a shorter overhang. If I incorporate the grille, headlight bezels, turn signals, and lower air dam into it, it will reduce weight tremendously. The one shown is only 5.5 lbs
Swedesport Motors, Apparel and Accessories for SAAB Junkies.
Http://Facebook.com/swedesportmotors
Swedesportmotors@gmail.com
Http://Facebook.com/swedesportmotors
Swedesportmotors@gmail.com
- SwedeSport
- Posts: 3021
- Joined: Mon Jun 15, 2009 9:52 am
- Number of Saabs currently owned: 5
- Location: Pottstown, PA
- Contact:
Re: 86 900 Street / Track Project
Front bumper without the airdam parts is 26 lbs. With the airdam 34 lbs.
Swedesport Motors, Apparel and Accessories for SAAB Junkies.
Http://Facebook.com/swedesportmotors
Swedesportmotors@gmail.com
Http://Facebook.com/swedesportmotors
Swedesportmotors@gmail.com
- Crazyswede
- Team Turbo Troll Crew
- Posts: 4540
- Joined: Fri Sep 22, 2006 3:53 pm
- Nickname: Mongo
- Number of Saabs currently owned: 97
- Location: Vermont
- Contact:
Re: 86 900 Street / Track Project
Looking forward to the airdam review. You should do a couple of runs with the airdam and a couple without it so you can do an apples to apples comparison.
I am the 73%
- SwedeSport
- Posts: 3021
- Joined: Mon Jun 15, 2009 9:52 am
- Number of Saabs currently owned: 5
- Location: Pottstown, PA
- Contact:
Re: 86 900 Street / Track Project
Got the airdam pretty much finished last night. I am going to add a few things to it later, like a pair of brake ducts, and maybe open up the grille area better.
I took it out for a ride on the street last night. It scrapes a little at intersections, and entering and leaving parking lots, but for the most part seems like it should be ok for a smooth roadway course. I may just have to put it on at the track, and take it off to transit home.
The splitter flexes a fair amount, but the actual framework is surprisingly rigid. In fact I can almost stand on the splitter. Everything is pop riveted together with exception of the welded angle rivet flange. I used countersunk screws, and locknuts to attach the splitter. I have a reasonable belief that the splitter is going to be somewhat sacrificial. So it can be replaced without much trouble.
Trial by fire this weekend!
I took it out for a ride on the street last night. It scrapes a little at intersections, and entering and leaving parking lots, but for the most part seems like it should be ok for a smooth roadway course. I may just have to put it on at the track, and take it off to transit home.
The splitter flexes a fair amount, but the actual framework is surprisingly rigid. In fact I can almost stand on the splitter. Everything is pop riveted together with exception of the welded angle rivet flange. I used countersunk screws, and locknuts to attach the splitter. I have a reasonable belief that the splitter is going to be somewhat sacrificial. So it can be replaced without much trouble.
Trial by fire this weekend!
Swedesport Motors, Apparel and Accessories for SAAB Junkies.
Http://Facebook.com/swedesportmotors
Swedesportmotors@gmail.com
Http://Facebook.com/swedesportmotors
Swedesportmotors@gmail.com
- squaab99t
- Posts: 1270
- Joined: Wed Mar 28, 2007 5:43 pm
- Number of Saabs currently owned: 4
- Location: Shoreline Wa
Re: 86 900 Street / Track Project
Looks badass. I have seen folks put a layer of plywood under the splitter for the wear surface. Cheaper and lighter than the uhmw plastic. If you go that route make sure you use some for outdoor use due to potential rain. It will look like a deck of cards if the water looses up the glue.
Some titanium rub blocks would be spectacular in the corners.
Good luck this weekend.
Some titanium rub blocks would be spectacular in the corners.
Good luck this weekend.
- Crazyswede
- Team Turbo Troll Crew
- Posts: 4540
- Joined: Fri Sep 22, 2006 3:53 pm
- Nickname: Mongo
- Number of Saabs currently owned: 97
- Location: Vermont
- Contact:
- SwedeSport
- Posts: 3021
- Joined: Mon Jun 15, 2009 9:52 am
- Number of Saabs currently owned: 5
- Location: Pottstown, PA
- Contact:
Re: 86 900 Street / Track Project
There is actually a product called Jabrock. It is a plywood product that is meant to be used as a sacrificial skid material.
I bought a whole 4x8 sheet of the HDPE that I used for the splitter. The .070 sheet plastic is the same stuff.
I bought a whole 4x8 sheet of the HDPE that I used for the splitter. The .070 sheet plastic is the same stuff.
Swedesport Motors, Apparel and Accessories for SAAB Junkies.
Http://Facebook.com/swedesportmotors
Swedesportmotors@gmail.com
Http://Facebook.com/swedesportmotors
Swedesportmotors@gmail.com
- RadioFlyer
- Posts: 918
- Joined: Wed Oct 05, 2011 11:08 am
- Nickname: RadioFlyer
- Number of Saabs currently owned: 7
- Location: Utah
Re: 86 900 Street / Track Project
That looks sweet! Would SPG panels be too heavy/wierd looking? I think they might complete the look.
Return to “Projects and Build Threads”
Who is online
Users browsing this forum: No registered users and 9 guests